Parquet Flooring Repair in Singapore

Yes. Most parquet issues including scratches, dents, water damage, and loose pieces can be professionally repaired.

Most residential projects take between 1–2 days depending on floor size and condition.

Parquet polishing usually ranges from SGD 1.40 to 3.00 per square foot depending on floor condition, varnish type, and project size.

Minor parquet repairs generally start from SGD 250, while larger repairs involving water damage or replacement pieces may cost more depending on the extent of damage.

Pricing depends on factors such as floor condition, water damage, hollow flooring, loose parquet pieces, scratches, and the number of replacement pieces required.

Yes, water-based varnish typically costs more than oil-based varnish due to its premium finish, lower odor, and environmentally friendly properties.

Both pricing methods are commonly used. Small residential projects are often quoted by room size, while larger projects are priced per square foot.

Yes, small parquet repair or polishing projects may have a minimum service charge depending on the location and work scope.

Estimated pricing can be provided via WhatsApp, but an on-site inspection helps ensure a more accurate quotation.

Yes, free site inspection and quotation are usually available for parquet repair and polishing projects across Singapore.

Parquet spot fixing is the repair of small damaged areas on parquet flooring without replacing or restoring the entire floor.

Common issues include scratches, dents, loose parquet pieces, hollow flooring, water damage, gaps, and minor swelling.

Yes, minor water-damaged areas can often be repaired by replacing affected parquet pieces and refinishing the surface.

Professional color matching and polishing techniques are used to blend the repaired section with the surrounding parquet flooring.

Most small parquet spot repairs can be completed within a few hours depending on the damage condition.

Yes, spot fixing is usually more affordable because only the damaged section is repaired instead of sanding and polishing the entire floor.

Not always. Minor repairs can often be done locally without full-floor sanding.

Yes, modern parquet sanding machines are equipped with dust collection systems to reduce dust during sanding and polishing.

Yes, smaller edge sanding machines are used to polish corners, edges, and hard-to-reach areas where larger machines cannot reach.

Professional-grade machines provide smoother sanding, better finish quality, faster work completion, and more consistent polishing results compared to DIY or freelancers' small equipment.

Oil-based varnish provides a rich, warm tone with high durability but strong chemical odor during drying. Water-based varnish dries faster, has low odor, preserves the natural light color of timber, and is eco-friendly.

Yes. Water leaks near bathrooms or balcony doors often cause parquet blocks to swell or loosen. We replace the damaged wood pieces, secure the base, and sand/polish the section to match the floor.

You can walk on the floor in socks after 24 hours. For heavy furniture, we recommend waiting 48 hours for oil-based varnish and 24 to 36 hours for water-based varnish to fully cure.

Deep dark stains caused by stagnant water or pet urine may penetrate deep into the timber grain. Deep sanding often removes surface stains, but severely discolored timber blocks may need to be replaced.

Sanding is largely dust-free using vacuum-integrated machines. However, due to varnish smell (especially oil-based), we recommend keeping the rooms well-ventilated or opting for low-odor water-based varnish if living on-site.